The Effective Way to Install the Screen Mesh of Linear Vibrating Screen

A. Please pay attention to the coarser mesh size, because the installation of the linear vibrating screen mesh is relatively complicated.
B. When cutting the mesh, keep the screen width and rack width the same, the length must be 50-70 mm longer than net rack.

 

C. When installing the mesh, please tight the screen mesh, because screen mesh tightness is one of the important factors that affects the screening efficiency.
D. When add the bouncing balls, it is important to check the screening difficulty of materials, please don’t add bouncing balls without consideration.
E. If material density or mesh size is superfine, you should install an extra screen mesh with a suitable size under the screen mesh, its purpose is to support the upper screen mesh, and reduce the material pressure to screen mesh and prolong the service life.

 

F. After finishing installing the net rack on the screen box as per requirement, do remember to put the extra screen mesh into the corresponding discharging outlet to avoid material mixing phenomenon.
G. After whole installation finishes, you should test run with few materials to check the material distribution and screening efficiency. If material moves forward evenly and classify accurately, no material mixing phenomenon, then the machine can be put into use. On the other contrary, if there is material off tracking , accumulation or uneven phenomenon, you should adjust the screen surface roughness and uniformity .If there is material mixing phenomenon, you should check whether screen mesh sealing is tight nor not, but if there is uneven material conveying or material mixing phenomenon, you should adjust the linear vibrating screen correspondingly.