What Should We Note When Screw Conveyor Conveys Material?

Screw conveyor normally works in the environment which is full of dust, so the bearing also works in the dust which leads the bearing wears seriously, therefore lubrication on a regular basis is an essential job in our daily operation. In the process of conveying material, we must pay attention to the following six items:

1.When screw conveyor starts to convey materials, please increase the material gradually and evenly, don't feed the material to the rated capacity one time, otherwise it will cause blockage, driving device overloads and will short the service life of screw conveyor.
2.Make sure there are no materials with large block and hardness, otherwise the screw conveyor will be stuck by materials and damages.

3.Start up the screw conveyor without load, feed the materials after the screw conveyor starts up.
4.Shut down the screw conveyor when there is no material, stop feeding material before shutting down the screw conveyor.
5.Check equipment parts regularly, take protective measures in advance.
6.During operation, must not to take down the cover plate or it will cause so as not to cause personal injury.